MOORING WINCHES OVERHAULBack

Another project that the FATTER team worked on in the July of 2017 was the Mooring Winches Overhaul project. This project began with the disassembly and inspection of the winches, followed by foundation repair and Rode Drum repairs. This was then continued with the blasting and painting of the winch surfaces and finally ending with inspection, testing and reassembly.

INCOMING CONDITION (FWD STBD)

 The process began with the dismantling of parts followed by a dimension and run out check. A bore check is done on the impeller and a dimension check is done on the wear ring. Masking and blasting is then carried out, as well as coating.